Safe for Users and the Environment: Eco-friendly certification guarantees no harmful emissions, protecting both workers and the environment.
Efficient Curing Time: Quick initial curing enhances productivity and minimizes project timelines.
Strong Bonding Performance: Provides reliable adhesion on a variety of stone surfaces, ensuring a clean finish without discoloration or stains.
Exceptional Durability: Offers high resistance to water and wear, maintaining superior performance in diverse climates and conditions.
Category | Base Material | Hardening Agent |
Major Composition | Epoxy Resin | Polyamide |
Appearance | White | Light Gray |
Packing Unit | 10kg PL | 10kg PL |
Application | Stone, Marble, Indoor & Outdoor | |
Standard Usage | abt. 1.0~1.5kg/m2, abt. 13~20m2/20kg(1 set) based on dotted application (The amount used varies depending on the site condition and work method.) | |
Specific Gravity | 1.6±0.1 | 1.7±0.1 |
Pot Life after mixing | abt. 10-20 minutes (in standard condition: Time may be increased or decreased according to the season and environment) | |
Early Curing Time | 4hrs (25°C, Fully cured : 7days) | |
Mixing Ratio | Base Material : Hardening agent = 1 : 1 | |
Storage | 6 Months | |
1. Pre-Installation Checklist
1. Completely remove any oil, dust, and other contaminants from the installation area.
2. Ensure the installation area is dry and free of moisture before starting work.
2. Stone Epoxy Adhesive Application
1. Mix the resin and hardener in a 1:1 weight ratio and stir thoroughly before use.
※ Failure to mix in the correct ratio or insufficient mixing may cause delayed drying and poor adhesion.
2. Mix only the necessary amount and use it within the pot life (30 minutes at 20°C).
3. Apply the mixed adhesive by dabbing it onto the corners and sides of the stone. (If the mixed adhesive gets on the stone surface, quickly clean it off with a thinner)
4. After applying the adhesive, make sure the materials being bonded stay in place until the adhesive is completely dry. Moving them too soon can weaken the bond.
For more details, please refer to the Technical Data Sheet (TDS) or the specifications.
